AirTies WOB-201 Bedienungsanleitung Seite 5
- Seite / 36
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
2
AirTies WOB-201 User Manual
1.
Introduction
AirTies WOB-201 is a wireless device that is designed for outdoor use as a Bridge or
Repeater. It is optimized for setting up secure wireless networks between buildings that
are far apart and provides high performance, low cost wireless communications outdoors
under all weather conditions.
With its internal 14dBi directional antenna, the WOB-201 enables you to set up point-to-
point and point-to-multipoint (max. 16 points) connections. It is an ideal solution for
campuses, industrial zones, and companies that spread out over multiple buildings
ensuring enterprise and community-wide connectivity. Additionally, it is capable of
mounting an external antenna, and can be used to create an outdoors hotspot through
the use of an external omni-directional antenna.
With the AutoMesh Technology developed by AirTies, you can easily configure the
Mesh/Repeater settings. The only thing you need to do is to place the access point
devices at those points where the signal is weak and assign the same AutoMesh ID to
all of them. In this way, you can boost the signal wherever it is weak and expand your
wireless network. If any of the access points fail, the AutoMesh technology routes the
signal over a different access point, thus, you do not experience any wireless network
interruptions. This also means you can expand your wireless network as much as you
want without any network interruptions.
For wireless network security, the WOB-201 supports the latest security standards, WPA2
and WPA (Wi-Fi Protected Access), as well as 64/128 bit WEP (Wired Equivalent Privacy)
encryption. You can encrypt your wireless broadcast using one of these standards and
keep your data and wireless network safe from outside intruders. Additionally, using the
MAC Address filtering feature, you can allow only the computers you chose to access
your wireless network.
All of the WOB-201 electronics are sealed in a weather-proof enclosure for mounting
outdoors. With the Power over Ethernet (PoE) feature, the power supply remains indoors
and only a single Ethernet cable goes between the indoors and the outdoor unit. It also
has two levels of surge protection for safety.
WOB-201 is designed to transmit in the unlicensed 2.4 GHz band. It can be integrated
into your existing Ethernet network seamlessly.
- User Manual 1
- Manual Overview 3
- Safety and Maintenance 3
- TABLE OF CONTENTS 4
- Introduction 5
- Main Features 6
- Package Contents 7
- WOB-201 Installation 8
- Safety Warnings 8
- Hardware Installation 9
- AirTies WOB-201 User Manual 10
- Making the indoor connections 14
- Configuring the WOB-201 15
- in the address field 16
- IP Settings 17
- Wireless Network Settings 18
- Operation Mode Selection 19
- Technology 20
- Initial Settings at Point A: 24
- WPA Security Settings 27
- To enable WPA encryption: 28
- WPA2 Security Settings 29
- WEP Security Settings 29
- Access Control 30
- Firmware Update 32
- Password Settings 32
- Physical Specifications 34
- Technical Specifications 34
- Bülent Çelebi 35
Verwandte Produkte und Handbücher für WLAN-Zugangspunkte AirTies WOB-201
(50 Seiten)Heath Zenith UT-5677-BZ manuales
Manuales del propietario y guías del usuario para Luces de trabajo Heath Zenith UT-5677-BZ.
Ofrecemos 1 manuales en pdf Heath Zenith UT-5677-BZ para descargar gratis por tipos de documentos: Manual de usuario
Kommentare zu diesen Handbüchern