AirTies WOB-201 Bedienungsanleitung PDF herunterladen (Seite 24)

Point-to-point (P2P) Connection Settings Using Manual Mode

Initial Settings at Point A:

1) Login to the WOB-201 Web interface. Make a note of the MAC Address that you'll

find on the "WELCOME" screen.

2) Go to IP Settings under the LAN menu.

Congratulations! You have completed configuring the WOB-201s for a point-to-point

connection. The devices that you have configured by entering a n AutoMesh ID and

AutoMesh Password will detect each other automatically and set up a Mesh connection.

When you add new Mesh points to your Mesh network, remember to use the same

AutoMesh ID and AutoMesh Password.

NOTE: You can use the above point-to-point configuration instructions for point-to-

multipoint connections as well. The WOB-201s that are connected to each other should

be broadcasting on the same channel. They should also use the same AutoMesh ID and

AutoMesh Password.

AirTies WOB-201 User Manual

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Keine Kommentare

AirTies WOB-201 Bedienungsanleitung Seite 24